Avery Berkel L126: Calibration [better]

: Locate the SW1 button (a small recessed switch) on the bottom or back of the indicator. Use a small screwdriver or pen to press it. The display should read "DIAG" .

Attempting to calibrate an L126 without proper preparation will fail. You need three things: physical tools, known weights, and security access. avery berkel l126 calibration

: Press the Zero button twice until the display changes to "C A L" . Confirm this selection by pressing the Test button . : Locate the SW1 button (a small recessed

: Locating the calibration switch (often labeled SW1 ) is the first step. On many Avery models, this is a small button on the bottom of the indicator that you must press with a pen or small screwdriver. Attempting to calibrate an L126 without proper preparation

: Press the Zero button twice until the display reads "C A L" . Confirm by pressing the Test button.

Common variants include the L126-30 (30kg capacity) and L126-60 (60kg capacity). because entering the wrong calibration code can permanently damage the load cell.