: Resetting the software counter does not empty the physical waste pads. If you don't clean or replace the sponges, ink may eventually leak.
If you are uncomfortable using unofficial software or risking malware, there epson adjustment program et-2760
: Performs deep cleaning cycles more intensive than the standard driver options. EEPROM Initialization : Resets the printer to factory default settings. Print Quality Adjustments : Resetting the software counter does not empty
| Tab | Function | ET-2760 Specifics | |------|----------|-------------------| | | Writes serial number, destination (US/EU/JP), and USB vendor ID to a new main board. | If skipped, the printer will only work in "factory mode" (no printing). | | Waste Ink Pad Counter | Resets the two counters: Main pad and Borderless pad. | Resets addresses 0x1A4 and 0x1A8 in EEPROM. Does not clean the pad. | | Head ID Input | Injects the printhead’s unique ID (printed on a sticker on the head). | Mismatch causes severe banding. The printer calibrates dot firing times based on this. | | Ink Charge | Forces a massive ink fill after printhead or damper replacement. | Uses ~50ml of ink. Dangerous on EcoTank if overused. | | EEPROM Backup | Dumps entire 4KB EEPROM to a .bin file. | Contains page counts, fatal error logs, and USB lock flags. | EEPROM Initialization : Resets the printer to factory
Using the Adjustment Program is not without risks. Before you download or run any software, consider the following:
The printhead will run dry, overheat, and permanently fuse the nozzles within seconds.