Htv 3.7.1 Register ((better)) File

| Register Address | Name | R/W | Description | |----------------|------|-----|-------------| | 0x00 | FIRMWARE_VER | R | Returns 0x0371 for version 3.7.1 | | 0x0B | SIGNAL_LOCK | R | Bit 0 = Tuner lock, Bit 1 = FEC sync | | 0x11 | SNR_DB | R | Signal-to-noise ratio in 0.1 dB steps | | 0x1A | STREAM_SRC | R/W | 0 = RF in, 1 = ASI input, 2 = IP | | 0x23 | PID_FILTER | R/W | Enables advanced PID filtering | | 0x3F | DEMOD_MODE | R/W | 0 = Auto, 1 = DVB-S2, 2 = DVB-T2, 3 = ISDB-T | | 0x7E | FACTORY_RST | W | Write 0xDEAD to restore defaults | Htv 3.7.1 Register

A: No. The Htv application is free. You only pay for a subscription or playlist if your provider charges for it. register

| Observed symptom | Likely register error | Fix | |----------------|----------------------|-----| | No audio on HEVC channel | PID_FILTER (0x23) set too restrictive | Write 0x00 to 0x23 | | Front panel stuck at “BOOT” | Incorrect DEMOD_MODE (0x3F) | Use serial console to write 0x00 (auto) | | Scrambled video (even with valid card) | CAS handshake bit (0x44) = 1 | Set 0x44 to 0 and reboot | | Remote control unresponsive | IR decode register (0x70) corrupted | Write 0x1F to 0x70, then 0x00 | | Observed symptom | Likely register error |