Vw 1.2 Tsi Injector Removal

If an injector stays in the head while the rail comes out, you have broken the retaining clip. Stop. You will need to fish the clip out of the bore later.

Do not attempt this job with a standard 10mm socket and a prayer. You need specific tools, or you will snap the injector body and turn a $200 repair into a $1,000 head removal job. vw 1.2 tsi injector removal

The 1.2 TSI engine's injectors are located beneath the intake manifold, necessitating its full removal. If an injector stays in the head while

This is non-negotiable. You need a slide hammer that threads onto the top of the injector. You can rent these from auto parts stores, but ensure it has the correct adapters for VAG (Volkswagen Audi Group) injectors. 2. Deep Reach Torx/Allen: To get the clamp bolt out. 3. The "Juice": Not coffee. You need high-quality penetrating oil (Plusgas or similar). WD-40 is a cleaner, not a rust buster. 4. Heat: A butane torch or a heat gun (use with extreme caution around fuel lines!). Do not attempt this job with a standard