| Symptom | Possible Cause | Solution | | :--- | :--- | :--- | | | Timer setting too low. | Increase timer setting. | | | Heating element broken. | Replace heating element. | | | Pressure not applied evenly. | Press arm down firmly with both hands if large bag. | | Bag melts or burns | Timer setting too high. | Decrease timer setting. | | | Teflon tape worn out. | Replace Teflon tape. | | Indicator light does not turn on | No power supply. | Check plug and outlet. | | | Internal fuse blown. | Consult a technician. | | Seal is uneven | Debris on sealing jaw. | Clean the rubber pad and Teflon strip. | | | Element not flat. | Re-seat or replace the heating element. |
| Frequency | Action | |-----------|--------| | Daily | Remove debris from sealing bar with cleaning brush (when cool). | | Weekly | Wipe label applicator roller with isopropyl alcohol. | | Monthly | Check film and label roll tension; clean internal fans with compressed air. | | Every 5000 cycles | Replace sealing bar Teflon tape (WeDo spare part #WDP-T50). | wedo paket 50 user manual
Proper maintenance extends the life of your WEDO PAKET 50. | Symptom | Possible Cause | Solution |